Consider placing it in a folder with other project documents. Request Support Send Us an Email Our fast response time ensures conversation within one business day. The ribbon should roll down the back of the back roller, forward through the wide-open part of the printer, up past the metal print head, and onto the front of the front roller. DuraLabel is a registered trademark of Graphic Products. The ribbon should be smooth at both spindles and across the print head — not folded back against itself. Right adjustable pressure knobs We need to move it back into place.

Uploader: Voktilar
Date Added: 11 September 2016
File Size: 38.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 86704
Price: Free* [*Free Regsitration Required]

You may need to re-tape the ribbon onto this take-up roller. The roll of label stock should have a pair of black plastic end caps, and the label stock should unroll from the top of the roll. If this setting peinter already correct, then click the Calibrate button to have Toro feed some of the label stock through and re-adjust its internal sensors. No network or IT required. How-to Print Banners with Echo.

When you are ready to print, be sure to load the correct material in duralwbel correct orientation. The ribbon may not be feeding onto its take-up roll correctly, or the printer may simply be following incorrect instructions. Click the Clear Error button on the error message to clear the error and retry the print job. Connecting The Printer 3.


Then, choose Sensorand then Calibration. We offer money saving options for DuraLabel owners.

DuraLabel 9000 PS

How to Load DuraLabel Bronco. Right adjustable pressure knobs Then, reopen your label design, and try printing again. Then, turn your Lobo back on again. Completing the Seagull Driver Wizard Window 8.

The most common cause for this is a simple mechanical issue, which can be fixed pringer a matter of seconds.

DuraLabel « Official DuraLabel® Store | Graphic Products

If you are still unable to print, there may be a problem in the part of Windows that controls the printer. Often, this is the result of a battery problem. Please contact our support team for help.

Print head is damaged. ISS is the manufacturer of SafetyPro vinyl labeling tape. The printer may also print out the labels that you suralabel waiting for.

Your DuraLabel is now cleaned and ready to use. You should hear a click from each side, near the green tabs, as the latches catch. We offer free support for the lifetime of our printers, and free labeling advice and assistance for all of our customers.


Go to the Stock tab, and look at the Type drop-down menu. Close the printer up again, turn it back on, and try printing once more. After passing the guides, the supply should reach forward over the black rubber roller near the front of the printer.

Hold the ESC key for ten seconds, then release it; the system will turn on.

This text box is being enlarged by dragging a corner handlebar while pressing the Shift Key. Call Us Toll Free from the U. Go to the Ports tab, and look for the port that is currently selected in that list. Only authorized supplies from Graphic Products will print correctly in the DuraLabel Check the Supply Prinfer First, check to make sure that the ribbon is feeding properly through the system.